Last updated 2025-06-23
De-nib and finesse policy
During the refinish process, defects in the paint may occur, such as dust particles, known as nibs. A repair facility is required to document when a de-nib and finesse process is required on a panel. The repair facility must upload photos supporting evidence that sanding was applied to each panel documented on the repair estimate.
Description
De-nib and finessing includes the removal of small, isolated dust particles, known as nibs, by sanding away the surface defect and applying a finishing glaze (polish) to restore the gloss. After refinishing any outer panel, it may be necessary to nib sand, or de-nib, any particles found within the final finish.
Eligibility
ICBC may pay for this operation only when a claim related refinish operation has been completed and photos of the de-nib and finesse process has been provided.
Note:
- For de-nib and finesse of exterior surface areas, an allowance of .2 per refinish hour, which is 20 percent, applies.
- Failure to upload supporting photos may result in denial of payment.